How to Choose a New Boiler for Your Home – have you been wondering?
A boiler is handy to have, especially in the depths of winter. It will keep your home nice and warm all throughout the winter and just about any time! You can enjoy hot water at the twist of a tap. But, especially for new homeowners, choosing a boiler can pose a bit of a challenge.
So how do you go about choosing one that doesn’t just keep your home cosy but is also energy-efficient, cost-effective, and eco-friendly? Here are a few tips.
Things to Consider When Choosing a New Boiler
#1: Size Matters
Before you whip out your card to pay for a boiler, be sure to ask if its output is proportionate to the needs of your household and the size of your home. Sales and/or installation personnel may ask you the following questions:
- How much hot water does your household consume on any given day?
- What are the dimensions of your house/flat?
In homes with a single shower and bath, the recommended boiler would have an output size of 24 to 30 kilowatts. A boiler with an output size of between 30 to 35 kilowatts, on the other hand, is a better choice for households with more than one bathroom.
Secondly, determine how much heat a home actually needs to prevent energy and heat wastage.
#2: Space is a Key Consideration
In the past, the term boiler room referred to the part of the house where a conventional coal-burning boiler was installed together with a tank that served as a reservoir for hot water. While that may still apply to stately old homes, it’s not a very practical option for today’s smaller living spaces.
Many households should opt for a combi boiler that is compact enough to be installed in a fairly small cabinet in the kitchen or laundry room. In addition, since it connects directly to the water mains, there is no need to install a reservoir that may take up valuable space in the home.
#3: Playing by Type
Having said that, conventional boilers are no longer a practical choice for today’s streamlined households. In which case, homeowners may choose between combi and system boilers for their heating requirements.
As stated previously, a combi boiler does not require a reservoir to provide hot water. As it is connected directly to the main water pipeline, it heats water only when you need it. This on-demand feature makes it a more sustainable choice as the boiler doesn’t need to be on a perpetual simmer, so to speak, which can seriously put a dent in your energy bill. If you think that a combi boiler seems to be the perfect boiler for your needs, you can check out this Worcester Bosch 4000 boiler review.
For larger homes with more than one bathroom or an extensive radiator network, system boilers work on a similar principle but have the advantage of a much larger capacity.
#4: The Fuel You Use Matters
With a growing emphasis on the battle against climate change, you must take even the type of fuel you use for powering your boiler into serious consideration.
Here in the UK, combi-type boilers can be connected to the gas mains; it’s a cleaner – and certainly safer – alternative to either traditional coal or oil-driven heating. You may also check within your community if it is possible to use solar, wind, and other forms of alternative energy to power your home heating systems.
So there you have it – the vital factors to consider when choosing your new boiler!
How to Choose a New Boiler for Your Home is a featured post