If you live in a period home with original single-glazed sash windows, double glazing may be the first upgrade you think about.
Before you book a survey, it helps to know what the choice involves. The rules depend on the type of property you own, replacement brings Building Regulations into play, and there are alternatives that keep the original windows. This guide covers each in turn.
Double Glazing or Secondary Glazing?
The two terms are easy to mix up, but they describe different jobs.
- Double glazed sash windows use two panes of glass in each sash instead of one.
- Secondary glazing is an extra pane fitted on the inside of the existing window. The Building Conservation Directory explains that it allows the original window and its glass to be kept, and leaves the outside appearance unchanged apart from a double reflection.
What you are allowed to change in your home can decide between them, so that is the place to start.
Check What Your Property Allows
In England, the Planning Portal sets out the main rules.
- Planning permission is not usually needed for repairs, maintenance, or new windows of a similar appearance to the originals. Internal secondary glazing is treated the same way.
- Article 4 Directions. A council can remove these permitted development rights for a street or area. The Royal Borough of Greenwich, for example, says most Article 4 Direction areas in the borough are in its conservation areas.
- Flats and maisonettes. The permitted development allowances apply to houses, not to flats and maisonettes. London boroughs including Greenwich and Lewisham say planning permission is needed to replace windows in a flat.
- Listed buildings. Listed building consent is needed for any significant works, internal or external.
- A leaseholder may first need permission from the landlord or management company.
The Planning Portal strongly advises checking with your local planning authority before you start.
Know When Building Regulations Apply
Replacement and repair are treated differently. The Planning Portal’s Building Regulations guidance says Building Regulations have applied to all replacement glazing since 1 April 2002, and that an external window is a “controlled fitting”.
For houses, its guidance draws the line like this:
- the regulations normally apply when the whole fixed frame and opening parts are replaced
- they do not normally apply when the work is no more than replacing broken glass, rotten sashes or rotten sections of the main frame
Where windows are replaced, an installer registered with a competent person scheme can certify the work. Otherwise, the work needs approval from building control, which issues a certificate of compliance. Keep the certificate, because you may be asked for it when you sell.
Energy efficiency is not the only test. The guidance also covers ventilation, means of escape and safety glazing in critical locations, such as glazing within 800mm of floor level.
For listed homes and homes in conservation areas, Approved Document L, Volume 1 (2021 edition with 2023 amendments) says work need not comply fully with the energy standards where that would unacceptably alter the home’s character or appearance. It must still comply as far as is reasonably practicable. A 2026 edition has since been published, so check with building control which edition applies.
Consider the Alternatives
Replacing windows is not the only way to make a sash window warmer. Research for English Heritage, now Historic England, tested a series of upgrades on an 1880s timber sash window at Glasgow Caledonian University. The results were published in 2009.
- Draught-proofing cut air leakage through the window by 86%.
- Low-emissivity secondary glazing cut heat loss through the whole window by 58%, and cut air leakage by 96%.
- Secondary glazing used with shutters cut heat loss by 62%.
When the research was published, English Heritage reported that good-quality secondary glazing brought the window’s U-value down to 1.7 W/m²K. The Building Regulations of the time targeted 2 W/m²K or below for windows.
The Building Conservation Directory also reports earlier research at Glasgow Caledonian University. It found that secondary glazing combined with draught-proofing of the original window could achieve a higher standard of thermal insulation than double glazing.
Historic England’s guidance on traditional windows adds that they can often be repaired simply and economically, usually at less cost than replacement.
When Replacement Makes Sense
Where a window is beyond repair, or you want double glazing in the sash itself rather than an extra layer inside, double glazed timber sash windows can be made to match the pattern of the originals.
Because this is replacement, the planning and Building Regulations checks above apply in full. A specialist who supplies replacement sash windows should be able to explain how the work will be certified, and whether your local authority needs to be involved first.
Before You Decide: A Quick Checklist
- Confirm whether your home is a house, a flat or a listed building, and whether an Article 4 Direction applies.
- Speak to your local planning authority if you are in a conservation area or a listed building.
- If you are a leaseholder, check the lease and ask the landlord or management company.
- Decide which windows need replacing and which could be repaired.
- Compare double glazing with draught-proofing and secondary glazing.
- For any replacement, agree how the work will be certified, and keep the certificate.
Upgrading sash windows can make a period home more comfortable, but the right route depends on the building as much as the windows. Checking the rules first means the windows you end up with suit both your home and the regulations.
